See how Steelmaster works in a fire (video file)
Steelmaster 60WB
- Single pack, water borne, thin film intumescent coating
- Provides fire resistance up to 90 minutes in dry internal environments
- Quick drying
- Low environmental impact with low VOC
- Very low odour makes it an ideal solution for onsite application
Steelmaster 60SB
- Solvent based, thin film intumescent coating
- Provides fire resistance for up to 60 minutes in cellulosic fires
- Corrosivity class up to C4 (ISO 12944-5) if topcoat is applied
- Suitable for both interior and exterior protection and may be applied onsite or offsite
- Easy to apply
Steelmaster 120SB
- Solvent based, thin film intumescent coating
- Provides fire resistance for up to 120 minutes in cellulosic fires
- Suitable for structural and hollow sections, both interior and exterior protection and may be applied onsite or offsite.
Steelmaster 60/120
- Solvent based, thin film intumescent coating
- Provides fire resistance for up to 90 minutes in cellulosic fires
- Suitable for both interior and exterior protection and may be applied onsite or offsite
Steelmaster top sealers
- A full range of top sealers, both water borne and solvent based
- May be tinted to most BS and RAL colours via Jotun’s MCI (Multicolor Industry) tinting systemSolvent based, thin film intumescent coating
Steelmaster primers
- A range of anticorrosive primers have been fire tested for compatibility with the Steelmaster intumescent coatings to ensure the integrity of the system in terms of fire performance
Contact your local Jotun office for a detailed written specification.
Go to Protective Coatings > Areas of activity > Passive Fire Protection
